User manual ver. 20250722
This document collects information on the safety, installation and use of the AURATON Vela device.
Thermoelectric actuator
The AURATON Vela thermoelectric actuator is designed for installation on underfloor heating manifolds and works with AURATON Aries, AURATON Taurus, AURATON Virgo and AURATON Floor Heating Controller.
AURATON Vela installation
How to install AURATON Vela on an underfloor heating manifold with an M30x1.5 mm insert:
Cleaning and maintenance
- Clean the exterior of the device with a dry cloth. Do not use solvents (such as benzene, thinner, or alcohol).
- Do not touch the device with wet hands. This may result in electric shock or serious damage to the device.
- Do not expose the device to excessive smoke or dust.
- Avoid contact of the device with liquids or moisture.
Technical data
| Power supply: | 230V AC |
| Operating temperature range: | 0 – 60°C |
| Actuator type: | NC (Normally Closed) |
| Direct current: | <=0.009A |
| Continuous power: | 2 In |
| Closing/opening time: | about 3 min |
| Degree of protection: | IP54 |
| Spring pressure force: | 90N +/-10% |
| Connecting cable (brown/blue) | L=0.95 m, 2×0.5 mm2 |
Disposal of the device
O
Devices are marked with a crossed-out waste bin symbol. In accordance with European Directive 2012/19/EU and the Waste Electrical and Electronic Equipment Act, this marking indicates that this equipment, after its useful life, must not be disposed of with other household waste.
Users are obligated to dispose of it at a collection point for used electrical and electronic equipment.
Manufacturer's address
Lars
ul. Świerkowa 14
64-320 Niepruszewo
Poland
www.auraton.pl